https://mikrotik.com/product/ltap_mini_lte_kit says 9W (1.8A @ 5v)

-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Dave Browning Sent: Thursday, 2 August 2018 2:02 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] LtAP Mini Kit

Thanks Alen, thought it appears to be cable agnostic.

What I have found is that if I use an iPad charger it works, so it must need a certain amount of amps to bring up the R11e onboard.

Can’t find any specs on the MT website, hence was hoping there were some other test units out in the wild.

Cheers, Dave

...

On 26 Jul 2018, at 12:31 pm, Alen Orsolic <alen@duxtel.com> wrote:

HI Dave,

I would try an alternative USB cable - one which is more of an A grade quality.

Regards,

Alen

-----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Dave Browning Sent: Thursday, 26 July 2018 12:03 PM To: public@talk.mikrotik.com.au Subject: [MT-AU Public] LtAP Mini Kit

Hi All,

Looking for anyone with an LtAP mini kit who can check if they have the same problem as I. If I power from USB port, the lte interface doesn't come up when WiFi is enabled - If I power from PoE or AC, works fine.

Cheers,

Dave Browning | Network Engineer P 1300 791 678 Level 1, 12 Railway Tce, Milton QLD 4064

_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au

_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au

---

Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au