Hello all, What are people using these days in order to support FTTB/N/C services on Mikrotik routers? I need to throw an NBN service into a site that uses FTTB and as we know the Proscend transceivers aren't around anymore. Unless someone has one laying around they'd be happy to part ways with... Regards, Christopher Hawker
Draytek Vigor 167 generally acting as a VDSL to Ethernet bridge. Patrick On Wed, 23 Oct 2024 at 10:28, Christopher Hawker via Public < public@talk.mikrotik.com.au> wrote:
Hello all,
What are people using these days in order to support FTTB/N/C services on Mikrotik routers? I need to throw an NBN service into a site that uses FTTB and as we know the Proscend transceivers aren't around anymore. Unless someone has one laying around they'd be happy to part ways with...
Regards, Christopher Hawker _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
The Draytek Vigor 130s were good, but several of the 167s I put in place had issues. VDSL connection would drop and it wouldn't come back until they were power cycled. I stopped using them. Now we use a Cisco router with a VDSL card. Our upstream provider gives them to us for free with a VDSL connection. I think they're around $100 on the second hand market. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Patrick Sayer via Public Sent: Wednesday, 23 October 2024 7:50 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Cc: Patrick Sayer <patrick.sayer@avtb.com.au> Subject: Re: [MT-AU Public] VDSL Support Draytek Vigor 167 generally acting as a VDSL to Ethernet bridge. Patrick On Wed, 23 Oct 2024 at 10:28, Christopher Hawker via Public < public@talk.mikrotik.com.au> wrote:
Hello all,
What are people using these days in order to support FTTB/N/C services on Mikrotik routers? I need to throw an NBN service into a site that uses FTTB and as we know the Proscend transceivers aren't around anymore. Unless someone has one laying around they'd be happy to part ways with...
Regards, Christopher Hawker _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
The Telstra TG799vac are cheap on eBay (sub $50 new) and work well for various clients of mine on FTTN in bridge mode with Mikrotik. If you initially connect them to a Telstra FTTN connection I have found they will self update over a period of time (20 mins) else you can force an update using this method: https://www.crc.id.au/hacking-the-technicolor-tg799vac-and-unlocking-feature... Other sites I install equipment on seem to supply cheapie DLink's and TPLinks in bridge mode plugged into Fortinet gear. If it works for them.... Regards, Jason Hecker <https://www.upandrunningtech.com.au> <https://www.upandrunningtech.com.au> On Wed, 23 Oct 2024, at 12:17, Russell Hurren via Public wrote:
The Draytek Vigor 130s were good, but several of the 167s I put in place had issues. VDSL connection would drop and it wouldn't come back until they were power cycled. I stopped using them. Now we use a Cisco router with a VDSL card. Our upstream provider gives them to us for free with a VDSL connection. I think they're around $100 on the second hand market.
-----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Patrick Sayer via Public Sent: Wednesday, 23 October 2024 7:50 To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Cc: Patrick Sayer <patrick.sayer@avtb.com.au> Subject: Re: [MT-AU Public] VDSL Support
Draytek Vigor 167 generally acting as a VDSL to Ethernet bridge.
Patrick
On Wed, 23 Oct 2024 at 10:28, Christopher Hawker via Public < public@talk.mikrotik.com.au> wrote:
Hello all,
What are people using these days in order to support FTTB/N/C services on Mikrotik routers? I need to throw an NBN service into a site that uses FTTB and as we know the Proscend transceivers aren't around anymore. Unless someone has one laying around they'd be happy to part ways with...
Regards, Christopher Hawker _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
The Vigor 130 does not support NBN SOS and ROC and there has never been a firmware update for them. I have a number in stock I cannot use for that reason. Any bridgeable modem that has VDSL 2, SOS and ROC will do as it only an interface changer. I have Netcomm and Netgear in place from the clients and updated the firmware to get them operational. Hope this helps. regards Anthony White On 23/10/24 12:17, Russell Hurren via Public wrote:
The Draytek Vigor 130s were good, but several of the 167s I put in place had issues. VDSL connection would drop and it wouldn't come back until they were power cycled. I stopped using them. Now we use a Cisco router with a VDSL card. Our upstream provider gives them to us for free with a VDSL connection. I think they're around $100 on the second hand market.
-----Original Message----- From: Public<public-bounces@talk.mikrotik.com.au> On Behalf Of Patrick Sayer via Public Sent: Wednesday, 23 October 2024 7:50 To: MikroTik Australia Public List<public@talk.mikrotik.com.au> Cc: Patrick Sayer<patrick.sayer@avtb.com.au> Subject: Re: [MT-AU Public] VDSL Support
Draytek Vigor 167 generally acting as a VDSL to Ethernet bridge.
Patrick
On Wed, 23 Oct 2024 at 10:28, Christopher Hawker via Public <public@talk.mikrotik.com.au> wrote:
Hello all,
What are people using these days in order to support FTTB/N/C services on Mikrotik routers? I need to throw an NBN service into a site that uses FTTB and as we know the Proscend transceivers aren't around anymore. Unless someone has one laying around they'd be happy to part ways with...
Regards, Christopher Hawker _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Are you sure? I had to do the upgrade on a few and they still work. https://www.draytek.com.au/products/adsl-vdsl-modem-routers/vigor130/ Regards, Jason Hecker <https://www.upandrunningtech.com.au> <https://www.upandrunningtech.com.au> On Wed, 23 Oct 2024, at 12:33, contact--- via Public wrote:
The Vigor 130 does not support NBN SOS and ROC and there has never been a firmware update for them. I have a number in stock I cannot use for that reason. Any bridgeable modem that has VDSL 2, SOS and ROC will do as it only an interface changer. I have Netcomm and Netgear in place from the clients and updated the firmware to get them operational. Hope this helps.
regards Anthony White
On 23/10/24 12:17, Russell Hurren via Public wrote:
The Draytek Vigor 130s were good, but several of the 167s I put in place had issues. VDSL connection would drop and it wouldn't come back until they were power cycled. I stopped using them. Now we use a Cisco router with a VDSL card. Our upstream provider gives them to us for free with a VDSL connection. I think they're around $100 on the second hand market.
-----Original Message----- From: Public<public-bounces@talk.mikrotik.com.au> On Behalf Of Patrick Sayer via Public Sent: Wednesday, 23 October 2024 7:50 To: MikroTik Australia Public List<public@talk.mikrotik.com.au> Cc: Patrick Sayer<patrick.sayer@avtb.com.au> Subject: Re: [MT-AU Public] VDSL Support
Draytek Vigor 167 generally acting as a VDSL to Ethernet bridge.
Patrick
On Wed, 23 Oct 2024 at 10:28, Christopher Hawker via Public <public@talk.mikrotik.com.au> wrote:
Hello all,
What are people using these days in order to support FTTB/N/C services on Mikrotik routers? I need to throw an NBN service into a site that uses FTTB and as we know the Proscend transceivers aren't around anymore. Unless someone has one laying around they'd be happy to part ways with...
Regards, Christopher Hawker _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
There is a firmware update for the 130 that will allow you to use them with the NBN - it doesn't support SOS and ROC, but it sends the right signals so that NBN doesn't try to use them (or something like that). So you don't get the benefits of SOS and ROC, but you can still use it. https://www.draytek.com.au/support/downloads/vigor130/ -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of contact--- via Public Sent: Wednesday, 23 October 2024 9:33 To: Russell Hurren via Public <public@talk.mikrotik.com.au> Cc: contact@acrosstechnology.com.au Subject: Re: [MT-AU Public] VDSL Support The Vigor 130 does not support NBN SOS and ROC and there has never been a firmware update for them. I have a number in stock I cannot use for that reason. Any bridgeable modem that has VDSL 2, SOS and ROC will do as it only an interface changer. I have Netcomm and Netgear in place from the clients and updated the firmware to get them operational. Hope this helps. regards Anthony White On 23/10/24 12:17, Russell Hurren via Public wrote:
The Draytek Vigor 130s were good, but several of the 167s I put in place had issues. VDSL connection would drop and it wouldn't come back until they were power cycled. I stopped using them. Now we use a Cisco router with a VDSL card. Our upstream provider gives them to us for free with a VDSL connection. I think they're around $100 on the second hand market.
-----Original Message----- From: Public<public-bounces@talk.mikrotik.com.au> On Behalf Of Patrick Sayer via Public Sent: Wednesday, 23 October 2024 7:50 To: MikroTik Australia Public List<public@talk.mikrotik.com.au> Cc: Patrick Sayer<patrick.sayer@avtb.com.au> Subject: Re: [MT-AU Public] VDSL Support
Draytek Vigor 167 generally acting as a VDSL to Ethernet bridge.
Patrick
On Wed, 23 Oct 2024 at 10:28, Christopher Hawker via Public <public@talk.mikrotik.com.au> wrote:
Hello all,
What are people using these days in order to support FTTB/N/C services on Mikrotik routers? I need to throw an NBN service into a site that uses FTTB and as we know the Proscend transceivers aren't around anymore. Unless someone has one laying around they'd be happy to part ways with...
Regards, Christopher Hawker _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Hi, No the vigor 130 doesn't support SOS and ROC, but there was an update to give it SRA, which is acceptable on NBN. https://www.draytek.com.au/support/downloads/vigor130/ Choose the modem11 one. Note however the recent vulnerabilities in many/most? draytek devices. In absence of a fix, you really need to lock down the admin interface(s) to specific IP addresses. It looks like they are not going to provide further firmware updates for these and similarly older devices. Date sent: Wed, 23 Oct 2024 12:33:05 +1100 To: Russell Hurren via Public <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] VDSL Support From: contact--- via Public <public@talk.mikrotik.com.au> Send reply to: MikroTik Australia Public List <public@talk.mikrotik.com.au> Copies to: "contact@acrosstechnology.com.au" <contact@acrosstechnology.com.au> [ Double-click this line for list subscription options ] The Vigor 130 does not support NBN SOS and ROC and there has never been a firmware update for them. I have a number in stock I cannot use for that reason. Any bridgeable modem that has VDSL 2, SOS and ROC will do as it only an interface changer. I have Netcomm and Netgear in place from the clients and updated the firmware to get them operational. Hope this helps. regards Anthony White On 23/10/24 12:17, Russell Hurren via Public wrote:
The Draytek Vigor 130s were good, but several of the 167s I put in place had issues. VDSL connection would drop and it wouldn't come back until they were power cycled. I stopped using them. Now we use a Cisco router with a VDSL card. Our upstream provider gives them to us for free with a VDSL connection. I think they're around $100 on the second hand market.
-----Original Message----- From: Public<public-bounces@talk.mikrotik.com.au> On Behalf Of Patrick Sayer via Public Sent: Wednesday, 23 October 2024 7:50 To: MikroTik Australia Public List<public@talk.mikrotik.com.au> Cc: Patrick Sayer<patrick.sayer@avtb.com.au> Subject: Re: [MT-AU Public] VDSL Support
Draytek Vigor 167 generally acting as a VDSL to Ethernet bridge.
Patrick
On Wed, 23 Oct 2024 at 10:28, Christopher Hawker via Public <public@talk.mikrotik.com.au> wrote:
Hello all,
What are people using these days in order to support FTTB/N/C services on Mikrotik routers? I need to throw an NBN service into a site that uses FTTB and as we know the Proscend transceivers aren't around anymore. Unless someone has one laying around they'd be happy to part ways with...
Regards, Christopher Hawker _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au----... Roger Plant
Hi, You don't need to lock down a modem in bridge mode, since there is no L3 access unless you forward to it with a NAT from the ethernet side. So any vulnerabillites are not as much of a concern, you won't even need a password. Tip: If you can collect SNMP stats setup snmp and make the dive reachable from a collector on your LAN or the Dude on the gateway router, to collect the modem stats, helps with argueing with NBN if there is a problem on the line, as they often pass the line test if the problem only happens when it rains. Â ie. They won't believe you have a problem unless you can prove it, and you will be charge for a callout if here isn't a problem. Reguards, Darren On 23/10/2024 1:55 pm, Roger Plant via Public wrote:
Hi,
No the vigor 130 doesn't support SOS and ROC, but there was an update to give it SRA, which is acceptable on NBN.
https://www.draytek.com.au/support/downloads/vigor130/
Choose the modem11 one.
Note however the recent vulnerabilities in many/most? draytek devices.
In absence of a fix, you really need to lock down the admin interface(s) to specific IP addresses. It looks like they are not going to provide further firmware updates for these and similarly older devices.
Date sent: Wed, 23 Oct 2024 12:33:05 +1100 To: Russell Hurren via Public <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] VDSL Support From: contact--- via Public <public@talk.mikrotik.com.au> Send reply to: MikroTik Australia Public List <public@talk.mikrotik.com.au> Copies to: "contact@acrosstechnology.com.au" <contact@acrosstechnology.com.au>
[ Double-click this line for list subscription options ]
The Vigor 130 does not support NBN SOS and ROC and there has never been a firmware update for them. I have a number in stock I cannot use for that reason. Any bridgeable modem that has VDSL 2, SOS and ROC will do as it only an interface changer. I have Netcomm and Netgear in place from the clients and updated the firmware to get them operational. Hope this helps.
regards Anthony White
On 23/10/24 12:17, Russell Hurren via Public wrote:
The Draytek Vigor 130s were good, but several of the 167s I put in place had issues. VDSL connection would drop and it wouldn't come back until they were power cycled. I stopped using them. Now we use a Cisco router with a VDSL card. Our upstream provider gives them to us for free with a VDSL connection. I think they're around $100 on the second hand market.
-----Original Message----- From: Public<public-bounces@talk.mikrotik.com.au> On Behalf Of Patrick Sayer via Public Sent: Wednesday, 23 October 2024 7:50 To: MikroTik Australia Public List<public@talk.mikrotik.com.au> Cc: Patrick Sayer<patrick.sayer@avtb.com.au> Subject: Re: [MT-AU Public] VDSL Support
Draytek Vigor 167 generally acting as a VDSL to Ethernet bridge.
Patrick
On Wed, 23 Oct 2024 at 10:28, Christopher Hawker via Public <public@talk.mikrotik.com.au> wrote:
Hello all,
What are people using these days in order to support FTTB/N/C services on Mikrotik routers? I need to throw an NBN service into a site that uses FTTB and as we know the Proscend transceivers aren't around anymore. Unless someone has one laying around they'd be happy to part ways with...
Regards, Christopher Hawker _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au----... Roger Plant
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
participants (7)
-
Christopher Hawker
-
contactï¼ acrosstechnology.com.au
-
Darren Clissold
-
Jason Hecker
-
Patrick Sayer
-
Roger Plant
-
Russell Hurren