Hi Mike, all, Looking for a small ptp device with a secondary ethernet port that also is capable of poe out, (think: _insert_other_brand_ nanostation M5) for a solar camera project (trying to avoid "other brand" if possible) Trying to avoid 12v poe switches, I can't even find a MT device that's low-end (as it only needs to cover 300 metres for 1 camera in a mains-less shed) that even has a second port, let alone with poe, surely MT has a competing product? I seem to be too monday-lagged-out to find one on MT's site even after 2 hits of caffeine... Any recommendations? -- Regards, Noel Butler This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message.
Hi, In the past I needed to power an SXT and Metal off one 24V PSU. I just got a pair of ethernet jacks and made it pass through so the units could communicate on ethernet with each other and get power from the plug pack.
From memory.... so double check...
The pass through was wired for 100Mbit comms on pins 1,2,3 and 6. ("B" wiring - Orange White, Orange, Greenwhite, Green) On both jacks I wired: * +24V onto 4 & 5. (Blue & BlueWhite) * GND to 7 & 8. (Brownwhite & Brown) I recently bought a WAPAC for a job that needed pass through eth and power. I didn't even check to see PoE was on port 2 assuming it was sane and was like the CAPAC. Turns out there is no PoE on eth2 on the new WAPAC for unfathomable reasons. Why the hell not?! Regards, Jason Hecker <https://www.upandrunningtech.com.au/> On Mon, 17 Apr 2023, at 09:04, Noel Butler wrote:
Hi Mike, all,
Looking for a small ptp device with a secondary ethernet port that also is capable of poe out, (think: _insert_other_brand_ nanostation M5) for a solar camera project (trying to avoid "other brand" if possible)
Trying to avoid 12v poe switches, I can't even find a MT device that's low-end (as it only needs to cover 300 metres for 1 camera in a mains-less shed) that even has a second port, let alone with poe, surely MT has a competing product? I seem to be too monday-lagged-out to find one on MT's site even after 2 hits of caffeine...
Any recommendations?
-- Regards, Noel Butler
This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Hi, Yes, it seems some hackery will have to happen if we use MT, crazy thing is the SXT "LTE" version (available in U.S. at least) has such capabilities, why they omit them in wifi range.... who knows.... Cheers On 17/04/2023 09:28, Jason Hecker wrote:
Hi,
In the past I needed to power an SXT and Metal off one 24V PSU. I just got a pair of ethernet jacks and made it pass through so the units could communicate on ethernet with each other and get power from the plug pack.
From memory.... so double check...
The pass through was wired for 100Mbit comms on pins 1,2,3 and 6. ("B" wiring - Orange White, Orange, Greenwhite, Green) On both jacks I wired:
* +24V onto 4 & 5. (Blue & BlueWhite) * GND to 7 & 8. (Brownwhite & Brown)
I recently bought a WAPAC for a job that needed pass through eth and power. I didn't even check to see PoE was on port 2 assuming it was sane and was like the CAPAC.
Turns out there is no PoE on eth2 on the new WAPAC for unfathomable reasons. Why the hell not?!
Regards, Jason Hecker <https://www.upandrunningtech.com.au/>
On Mon, 17 Apr 2023, at 09:04, Noel Butler wrote:
Hi Mike, all,
Looking for a small ptp device with a secondary ethernet port that also is capable of poe out, (think: _insert_other_brand_ nanostation M5) for a solar camera project (trying to avoid "other brand" if possible)
Trying to avoid 12v poe switches, I can't even find a MT device that's low-end (as it only needs to cover 300 metres for 1 camera in a mains-less shed) that even has a second port, let alone with poe, surely MT has a competing product? I seem to be too monday-lagged-out to find one on MT's site even after 2 hits of caffeine...
Any recommendations?
-- Regards, Noel Butler This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message.
The SXT-LTE is available in Australia https://wisp.net.au/mikrotik-rbsxtr-r11e-lte6.html Not sure if there's any compliance issues, but they shouldn't be selling them if there are. I've used one. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Noel Butler Sent: Monday, April 17, 2023 9:02 AM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] ptp w/poe passthru Hi, Yes, it seems some hackery will have to happen if we use MT, crazy thing is the SXT "LTE" version (available in U.S. at least) has such capabilities, why they omit them in wifi range.... who knows.... Cheers On 17/04/2023 09:28, Jason Hecker wrote:
Hi,
In the past I needed to power an SXT and Metal off one 24V PSU. I just got a pair of ethernet jacks and made it pass through so the units could communicate on ethernet with each other and get power from the plug pack.
From memory.... so double check...
The pass through was wired for 100Mbit comms on pins 1,2,3 and 6. ("B" wiring - Orange White, Orange, Greenwhite, Green) On both jacks I wired:
* +24V onto 4 & 5. (Blue & BlueWhite) * GND to 7 & 8. (Brownwhite & Brown)
I recently bought a WAPAC for a job that needed pass through eth and power. I didn't even check to see PoE was on port 2 assuming it was sane and was like the CAPAC.
Turns out there is no PoE on eth2 on the new WAPAC for unfathomable reasons. Why the hell not?!
Regards, Jason Hecker <https://www.upandrunningtech.com.au/>
On Mon, 17 Apr 2023, at 09:04, Noel Butler wrote:
Hi Mike, all,
Looking for a small ptp device with a secondary ethernet port that also is capable of poe out, (think: _insert_other_brand_ nanostation M5) for a solar camera project (trying to avoid "other brand" if possible)
Trying to avoid 12v poe switches, I can't even find a MT device that's low-end (as it only needs to cover 300 metres for 1 camera in a mains-less shed) that even has a second port, let alone with poe, surely MT has a competing product? I seem to be too monday-lagged-out to find one on MT's site even after 2 hits of caffeine...
Any recommendations?
-- Regards, Noel Butler This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
No compliance issues, we've got it too ; ) https://store.duxtel.com/sxt_lte_kit But the OP is about p2p devices - I don't think this one will do it :-( I initially wondered whether the power jack on these devices could be used to take poe out (some of the old RouterBoard models could do it - e.g. RB450G) but haven't gotten around to try it out ; ) Cheers! Mike. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Russell Hurren Sent: Monday, 17 April 2023 12:36 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] ptp w/poe passthru The SXT-LTE is available in Australia https://wisp.net.au/mikrotik-rbsxtr-r11e-lte6.html Not sure if there's any compliance issues, but they shouldn't be selling them if there are. I've used one. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Noel Butler Sent: Monday, April 17, 2023 9:02 AM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] ptp w/poe passthru Hi, Yes, it seems some hackery will have to happen if we use MT, crazy thing is the SXT "LTE" version (available in U.S. at least) has such capabilities, why they omit them in wifi range.... who knows.... Cheers On 17/04/2023 09:28, Jason Hecker wrote:
Hi,
In the past I needed to power an SXT and Metal off one 24V PSU. I just got a pair of ethernet jacks and made it pass through so the units could communicate on ethernet with each other and get power from the plug pack.
From memory.... so double check...
The pass through was wired for 100Mbit comms on pins 1,2,3 and 6. ("B" wiring - Orange White, Orange, Greenwhite, Green) On both jacks I wired:
* +24V onto 4 & 5. (Blue & BlueWhite) * GND to 7 & 8. (Brownwhite & Brown)
I recently bought a WAPAC for a job that needed pass through eth and power. I didn't even check to see PoE was on port 2 assuming it was sane and was like the CAPAC.
Turns out there is no PoE on eth2 on the new WAPAC for unfathomable reasons. Why the hell not?!
Regards, Jason Hecker <https://www.upandrunningtech.com.au/>
On Mon, 17 Apr 2023, at 09:04, Noel Butler wrote:
Hi Mike, all,
Looking for a small ptp device with a secondary ethernet port that also is capable of poe out, (think: _insert_other_brand_ nanostation M5) for a solar camera project (trying to avoid "other brand" if possible)
Trying to avoid 12v poe switches, I can't even find a MT device that's low-end (as it only needs to cover 300 metres for 1 camera in a mains-less shed) that even has a second port, let alone with poe, surely MT has a competing product? I seem to be too monday-lagged-out to find one on MT's site even after 2 hits of caffeine...
Any recommendations?
-- Regards, Noel Butler This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
I must have missed it on your site Mike, or otherwise you didn't have it at the time. Good to know. But yeah, my comment was in response to 'available in U.S. at least' and doesn't help Noel, unfortunately. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Mike Everest Sent: Monday, April 17, 2023 1:30 PM To: 'MikroTik Australia Public List' <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] ptp w/poe passthru No compliance issues, we've got it too ; ) https://store.duxtel.com/sxt_lte_kit But the OP is about p2p devices - I don't think this one will do it :-( I initially wondered whether the power jack on these devices could be used to take poe out (some of the old RouterBoard models could do it - e.g. RB450G) but haven't gotten around to try it out ; ) Cheers! Mike. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Russell Hurren Sent: Monday, 17 April 2023 12:36 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] ptp w/poe passthru The SXT-LTE is available in Australia https://wisp.net.au/mikrotik-rbsxtr-r11e-lte6.html Not sure if there's any compliance issues, but they shouldn't be selling them if there are. I've used one. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Noel Butler Sent: Monday, April 17, 2023 9:02 AM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] ptp w/poe passthru Hi, Yes, it seems some hackery will have to happen if we use MT, crazy thing is the SXT "LTE" version (available in U.S. at least) has such capabilities, why they omit them in wifi range.... who knows.... Cheers On 17/04/2023 09:28, Jason Hecker wrote:
Hi,
In the past I needed to power an SXT and Metal off one 24V PSU. I just got a pair of ethernet jacks and made it pass through so the units could communicate on ethernet with each other and get power from the plug pack.
From memory.... so double check...
The pass through was wired for 100Mbit comms on pins 1,2,3 and 6. ("B" wiring - Orange White, Orange, Greenwhite, Green) On both jacks I wired:
* +24V onto 4 & 5. (Blue & BlueWhite) * GND to 7 & 8. (Brownwhite & Brown)
I recently bought a WAPAC for a job that needed pass through eth and power. I didn't even check to see PoE was on port 2 assuming it was sane and was like the CAPAC.
Turns out there is no PoE on eth2 on the new WAPAC for unfathomable reasons. Why the hell not?!
Regards, Jason Hecker <https://www.upandrunningtech.com.au/>
On Mon, 17 Apr 2023, at 09:04, Noel Butler wrote:
Hi Mike, all,
Looking for a small ptp device with a secondary ethernet port that also is capable of poe out, (think: _insert_other_brand_ nanostation M5) for a solar camera project (trying to avoid "other brand" if possible)
Trying to avoid 12v poe switches, I can't even find a MT device that's low-end (as it only needs to cover 300 metres for 1 camera in a mains-less shed) that even has a second port, let alone with poe, surely MT has a competing product? I seem to be too monday-lagged-out to find one on MT's site even after 2 hits of caffeine...
Any recommendations?
-- Regards, Noel Butler This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
:-D No drama - was mostly responding to the question about compliance : ) Cheers! -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Russell Hurren Sent: Monday, 17 April 2023 6:54 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] ptp w/poe passthru I must have missed it on your site Mike, or otherwise you didn't have it at the time. Good to know. But yeah, my comment was in response to 'available in U.S. at least' and doesn't help Noel, unfortunately. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Mike Everest Sent: Monday, April 17, 2023 1:30 PM To: 'MikroTik Australia Public List' <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] ptp w/poe passthru No compliance issues, we've got it too ; ) https://store.duxtel.com/sxt_lte_kit But the OP is about p2p devices - I don't think this one will do it :-( I initially wondered whether the power jack on these devices could be used to take poe out (some of the old RouterBoard models could do it - e.g. RB450G) but haven't gotten around to try it out ; ) Cheers! Mike. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Russell Hurren Sent: Monday, 17 April 2023 12:36 PM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] ptp w/poe passthru The SXT-LTE is available in Australia https://wisp.net.au/mikrotik-rbsxtr-r11e-lte6.html Not sure if there's any compliance issues, but they shouldn't be selling them if there are. I've used one. -----Original Message----- From: Public <public-bounces@talk.mikrotik.com.au> On Behalf Of Noel Butler Sent: Monday, April 17, 2023 9:02 AM To: public@talk.mikrotik.com.au Subject: Re: [MT-AU Public] ptp w/poe passthru Hi, Yes, it seems some hackery will have to happen if we use MT, crazy thing is the SXT "LTE" version (available in U.S. at least) has such capabilities, why they omit them in wifi range.... who knows.... Cheers On 17/04/2023 09:28, Jason Hecker wrote:
Hi,
In the past I needed to power an SXT and Metal off one 24V PSU. I just got a pair of ethernet jacks and made it pass through so the units could communicate on ethernet with each other and get power from the plug pack.
From memory.... so double check...
The pass through was wired for 100Mbit comms on pins 1,2,3 and 6. ("B" wiring - Orange White, Orange, Greenwhite, Green) On both jacks I wired:
* +24V onto 4 & 5. (Blue & BlueWhite) * GND to 7 & 8. (Brownwhite & Brown)
I recently bought a WAPAC for a job that needed pass through eth and power. I didn't even check to see PoE was on port 2 assuming it was sane and was like the CAPAC.
Turns out there is no PoE on eth2 on the new WAPAC for unfathomable reasons. Why the hell not?!
Regards, Jason Hecker <https://www.upandrunningtech.com.au/>
On Mon, 17 Apr 2023, at 09:04, Noel Butler wrote:
Hi Mike, all,
Looking for a small ptp device with a secondary ethernet port that also is capable of poe out, (think: _insert_other_brand_ nanostation M5) for a solar camera project (trying to avoid "other brand" if possible)
Trying to avoid 12v poe switches, I can't even find a MT device that's low-end (as it only needs to cover 300 metres for 1 camera in a mains-less shed) that even has a second port, let alone with poe, surely MT has a competing product? I seem to be too monday-lagged-out to find one on MT's site even after 2 hits of caffeine...
Any recommendations?
-- Regards, Noel Butler This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Hi, Perhaps the Map 2nd, it's quite good, if getting old... Regards Roger [ Double-click this line for list subscription options ] Hi Mike, all, Looking for a small ptp device with a secondary ethernet port that also is capable of poe out, (think: _insert_other_brand_ nanostation M5) for a solar camera project (trying to avoid "other brand" if possible) Trying to avoid 12v poe switches, I can't even find a MT device that's low-end (as it only needs to cover 300 metres for 1 camera in a mains-less shed) that even has a second port, let alone with poe, surely MT has a competing product? I seem to be too monday-lagged-out to find one on MT's site even after 2 hits of caffeine... Any recommendations? -- Regards, Noel Butler This Email, including attachments, may contain legally privileged information, therefore at all times remains confidential and subject to copyright protected under international law. You may not disseminate this message without the authors express written authority to do so. If you are not the intended recipient, please notify the sender then delete all copies of this message including attachments immediately. Confidentiality, copyright, and legal privilege are not waived or lost by reason of the mistaken delivery of this message. _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au---------------------------- Roger Plant
participants (5)
-
Jason Hecker
-
Mike Everest
-
Noel Butler
-
Roger Plant
-
Russell Hurren