Ethernet over Twisted Pair
Good news on the Proscend PS180-T SFP certification. What’s the verdict on using twisted pair in place of cat 5/6 where re-cabling isn’t possible? Can I use 2 MK routers with an sfp module in each to achieve this? Would I use pppoe or some other config? Is the above sfp module appropriate for the job? Thankyou, Matt
On 17 Sep 2019, at 12:00, public-request@talk.mikrotik.com.au wrote:
Proscend PS180-T SFP
Yes you can use the 180C/R paired version on a single twisted pair. I have them on a site plugged into RB260GSPs linking 2 motel buildings by reusing the defunct internal phone system wiring. Over about 70m they can do 140Mbit FULL DUPLEX. No configuration - plug and play like regular ethernet. Regards, Jason Hecker <https://www.upandrunningtech.com.au/> <https://www.upandrunningtech.com.au/> On Tue, 17 Sep 2019, at 19:31, Matt Hall wrote:
Good news on the Proscend PS180-T SFP certification.
What’s the verdict on using twisted pair in place of cat 5/6 where re-cabling isn’t possible?
Can I use 2 MK routers with an sfp module in each to achieve this?
Would I use pppoe or some other config?
Is the above sfp module appropriate for the job?
Thankyou,
Matt
On 17 Sep 2019, at 12:00, public-request@talk.mikrotik.com.au wrote:
Proscend PS180-T SFP
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
participants (2)
-
Jason Hecker -
Matt Hall