Man what is it with kernel failures at the moment, it must be the weather, anybody else seem to be getting a few lately ?? We have seen two in two days from totally different device types, both critical devices of course.... Regards Paul
Never had one myself....are the bad blocks high? On 3 Mar 2017 10:58 AM, "Paul Julian" <paul@oxygennetworks.com.au> wrote:
Man what is it with kernel failures at the moment, it must be the weather, anybody else seem to be getting a few lately ??
We have seen two in two days from totally different device types, both critical devices of course....
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Only 0.2%, not much.... Regards Paul -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Steve Sugden Sent: Friday, 3 March 2017 12:00 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Kernel Failures Never had one myself....are the bad blocks high? On 3 Mar 2017 10:58 AM, "Paul Julian" <paul@oxygennetworks.com.au> wrote:
Man what is it with kernel failures at the moment, it must be the weather, anybody else seem to be getting a few lately ??
We have seen two in two days from totally different device types, both critical devices of course....
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Is this a CCR1036 by any chance ? On Fri, Mar 3, 2017 at 2:03 PM, Paul Julian <paul@oxygennetworks.com.au> wrote:
Only 0.2%, not much....
Regards Paul
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Steve Sugden Sent: Friday, 3 March 2017 12:00 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Kernel Failures
Never had one myself....are the bad blocks high?
On 3 Mar 2017 10:58 AM, "Paul Julian" <paul@oxygennetworks.com.au> wrote:
Man what is it with kernel failures at the moment, it must be the weather, anybody else seem to be getting a few lately ??
We have seen two in two days from totally different device types, both critical devices of course....
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
No, actually a CCR1016 Regards Paul -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Andrew Thrift Sent: Monday, 6 March 2017 1:57 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Kernel Failures Is this a CCR1036 by any chance ? On Fri, Mar 3, 2017 at 2:03 PM, Paul Julian <paul@oxygennetworks.com.au> wrote:
Only 0.2%, not much....
Regards Paul
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Steve Sugden Sent: Friday, 3 March 2017 12:00 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Kernel Failures
Never had one myself....are the bad blocks high?
On 3 Mar 2017 10:58 AM, "Paul Julian" <paul@oxygennetworks.com.au> wrote:
Man what is it with kernel failures at the moment, it must be the weather, anybody else seem to be getting a few lately ??
We have seen two in two days from totally different device types, both critical devices of course....
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Hi Paul, It would pay to open it up, if the 2 large Electrolytic capacitors at the rear of the PSU have a black plastic casing, check the C10 capacitor for signs of leakage (raised top). This capacitor is near the rear of the PCB closest to the heatsink. It is common for these to start leaking on early CCR1036/1016 units and cause kernel failures. On Mon, Mar 6, 2017 at 4:06 PM, Paul Julian <paul@oxygennetworks.com.au> wrote:
No, actually a CCR1016
Regards Paul
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Andrew Thrift Sent: Monday, 6 March 2017 1:57 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Kernel Failures
Is this a CCR1036 by any chance ?
On Fri, Mar 3, 2017 at 2:03 PM, Paul Julian <paul@oxygennetworks.com.au> wrote:
Only 0.2%, not much....
Regards Paul
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Steve Sugden Sent: Friday, 3 March 2017 12:00 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Kernel Failures
Never had one myself....are the bad blocks high?
On 3 Mar 2017 10:58 AM, "Paul Julian" <paul@oxygennetworks.com.au> wrote:
Man what is it with kernel failures at the moment, it must be the weather, anybody else seem to be getting a few lately ??
We have seen two in two days from totally different device types, both critical devices of course....
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Mmm, interesting, thanks for the heads up. I will have to swap it out first though, It's one of our more critical routers on our network. I will see how I go, thanks Regards Paul -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Andrew Thrift Sent: Monday, 6 March 2017 2:22 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Kernel Failures Hi Paul, It would pay to open it up, if the 2 large Electrolytic capacitors at the rear of the PSU have a black plastic casing, check the C10 capacitor for signs of leakage (raised top). This capacitor is near the rear of the PCB closest to the heatsink. It is common for these to start leaking on early CCR1036/1016 units and cause kernel failures. On Mon, Mar 6, 2017 at 4:06 PM, Paul Julian <paul@oxygennetworks.com.au> wrote:
No, actually a CCR1016
Regards Paul
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Andrew Thrift Sent: Monday, 6 March 2017 1:57 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Kernel Failures
Is this a CCR1036 by any chance ?
On Fri, Mar 3, 2017 at 2:03 PM, Paul Julian <paul@oxygennetworks.com.au> wrote:
Only 0.2%, not much....
Regards Paul
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Steve Sugden Sent: Friday, 3 March 2017 12:00 PM To: MikroTik Australia Public List Subject: Re: [MT-AU Public] Kernel Failures
Never had one myself....are the bad blocks high?
On 3 Mar 2017 10:58 AM, "Paul Julian" <paul@oxygennetworks.com.au> wrote:
Man what is it with kernel failures at the moment, it must be the weather, anybody else seem to be getting a few lately ??
We have seen two in two days from totally different device types, both critical devices of course....
Regards Paul _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Hi all i have basic fire wall set up i use with a few bells and whistles. I.e. bogon list, which i wish to expand on, I was hopeing to start up a discussion to begin creating a awesome firewall we could all benifit from
Sounds good, aside from my normal rules, this script is excellent. https://forum.mikrotik.com/viewtopic.php?f=9&t=98804 Matt On Mar 7, 2017 11:44 AM, "Paul Parnis" <paul@itoncall.com.au> wrote:
Hi all i have basic fire wall set up i use with a few bells and whistles. I.e. bogon list, which i wish to expand on, I was hopeing to start up a discussion to begin creating a awesome firewall we could all benifit from _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
Just as I thought Microtik "ROCKS". Do you have any idea who looks after the mikrotikfilters website? -----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Matt Chipman Sent: Tuesday, 7 March 2017 11:23 AM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] Ultimate firewall setup Sounds good, aside from my normal rules, this script is excellent. https://forum.mikrotik.com/viewtopic.php?f=9&t=98804 Matt On Mar 7, 2017 11:44 AM, "Paul Parnis" <paul@itoncall.com.au> wrote:
Hi all i have basic fire wall set up i use with a few bells and whistles. I.e. bogon list, which i wish to expand on, I was hopeing to start up a discussion to begin creating a awesome firewall we could all benifit from _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
This is a really interesting thread Matt - thanks for pointing it out. I'm also interested in that discussion Paul and I'm happy to share what I currently have although I'm sure it's laughable. Ben Jackson eLogik m:0404 924745 e: ben@elogik.net w: www.elogik.com.au [image: http://www.elogik.com.au] <http://www.elogik.com.au> On Tue, Mar 7, 2017 at 12:08 PM, Paul Parnis <paul@itoncall.com.au> wrote:
Just as I thought Microtik "ROCKS". Do you have any idea who looks after the mikrotikfilters website?
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Matt Chipman Sent: Tuesday, 7 March 2017 11:23 AM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] Ultimate firewall setup
Sounds good, aside from my normal rules, this script is excellent.
https://forum.mikrotik.com/viewtopic.php?f=9&t=98804
Matt
On Mar 7, 2017 11:44 AM, "Paul Parnis" <paul@itoncall.com.au> wrote:
Hi all i have basic fire wall set up i use with a few bells and whistles. I.e. bogon list, which i wish to expand on, I was hopeing to start up a discussion to begin creating a awesome firewall we could all benifit from _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
I reckon a wiki that authorised users could edit that had tips and scripting and config recipes would be good. The Mikrotik wiki is OK but lacking at times. On 8 March 2017 at 07:31, Ben Jackson - eLogik <ben@elogik.net> wrote:
This is a really interesting thread Matt - thanks for pointing it out.
I'm also interested in that discussion Paul and I'm happy to share what I currently have although I'm sure it's laughable.
Ben Jackson eLogik m:0404 924745 e: ben@elogik.net w: www.elogik.com.au [image: http://www.elogik.com.au] <http://www.elogik.com.au>
On Tue, Mar 7, 2017 at 12:08 PM, Paul Parnis <paul@itoncall.com.au> wrote:
Just as I thought Microtik "ROCKS". Do you have any idea who looks after the mikrotikfilters website?
-----Original Message----- From: Public [mailto:public-bounces@talk.mikrotik.com.au] On Behalf Of Matt Chipman Sent: Tuesday, 7 March 2017 11:23 AM To: MikroTik Australia Public List <public@talk.mikrotik.com.au> Subject: Re: [MT-AU Public] Ultimate firewall setup
Sounds good, aside from my normal rules, this script is excellent.
https://forum.mikrotik.com/viewtopic.php?f=9&t=98804
Matt
On Mar 7, 2017 11:44 AM, "Paul Parnis" <paul@itoncall.com.au> wrote:
Hi all i have basic fire wall set up i use with a few bells and whistles. I.e. bogon list, which i wish to expand on, I was hopeing to start up a discussion to begin creating a awesome firewall we could all benifit from _______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com. au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au
participants (7)
-
Andrew Thrift -
Ben Jackson - eLogik -
Jason Hecker (Up & Running Tech) -
Matt Chipman -
Paul Julian -
Paul Parnis -
Steve Sugden